TD Digital Screwdriver (Non-radio equipped)

The TD Digital Torque and Angle Torque Drivers bring a new level of torque control and accuracy to your low torque applications. Here is a quick list of features that help make your low torque applications error-free.

• The TD is a digital torque and angle screwdriver. Torque and angle are significantly more accurate than torque alone.
• Torque and angle functionality immediately notifies the operator if they are trying to tighten a fastener that has previously been tightened or is cross-threaded.
• The TD comes in two torque capacities: 80 inch-pounds and 100 inch-ounces.   
• Meets/exceeds ASME B107.300-2010 and ISO 6789
• Bi-directional +/- 2% Indicated Value from 20% to 100% of tool capacity.
• All torque and angle settings are set using the buttons on the torque screwdriver. P-Sets are established, edited, and saved using the keypad on the tool.
• The display backlight is visible when torque is applied. Displays the torque and angle value on the digital display on the screwdriver.
• Visible from any angle, the light band on the driver turns yellow, then green, the driver beeps, and the handle vibrates when target torque is achieved.
•  1/4" Female hexagon and a 1/4" male square drive versions are available in the 80 in. lb. capacity. The 100 in. oz. version comes with the 1/4" Female hex drive. 
•  ESD Compliant when the grounding strap is properly worn.
• Powered by 1 AA  NiMH rechargeable battery (1 included with tool purchase). 
• Battery chargers with 4 slot and 8 slot charging options are sold separately.
• Password protected
• Units of measure: in-oz, in-lb, ft-lb, cNm, NM, cmkg
• Modes of operation: Peak, TAM, T2A, Residual, Prevailing Torque

Accessing the results log in the TD is done by simply scrolling through the history log. Torque results are stored there. 

Ready to order? Contact your local Sturtevant Richmont sales professional.

Sturtevant Richmont Tools Are Made in the USA