Need a parts print? Click on the part number of the drawing you want. It will launch and you can download it.

Looking for the instruction set for the LTCR preset torque wrench with a fixed ratchet? Scroll down to the bottom of the page and the instruction set is available for download. 

Please note that these wrenches click in one direction meaning that they apply and measure torque in the clockwise direction. This preset torque wrench comes with an arrow engraved on the case that calls out which direction torque will be applied and measured. You can use this tool to loosen a fastener in the counterclockwise direction, but you will NOT be able to measure the amount of applied torque.  

When the wrench clicks, the designated amount of torque has been applied. Stop pulling. Continuing to pull after the wrench clicks can increase the applied torque to a value that exceeds the engineering specification. 

Specification and Ordering Information

 

LTCR Ratcheting Preset Click Wrench English Units of Measure              

Part NumberModel Designation

Minimum Capacity English

Tool Capacity EnglishMinimum Capacity MetricTool Capacity MetricSquare Drive Size (in)
810400 LTCR 50 I 10 in-lb 50 in-lb 1.2 Nm 6 Nm 1/4
810401 LTCR 150 I 30 In-lb 150 in-lb 3.4 Nm 17 Nm 1/4
810589 LTCR 150 I 30 in-lb 150 in-lb 3.4 Nm 17 Nm 3/8
810058 LTCR 300 I 60 In-lb 300 in-lb 6.8 Nm 34 Nm 3/8
810055 LTCR 750 I 150 in-lb 750 in-lb 17 Nm 85 Nm 3/8
810060 LTCR 750 I 150 in-lb 750 in-lb 17 Nm 85 Nm 1/2
810402 LTCR 1200 I 240 in-lb 1200 in-lb 27.2 Nm 136 Nm 3/8
810056 LTCR 1800 I 360 in-lb 1800 in-lb 40.8 Nm 204 Nm 1/2
810059 LTCR 3000 I 600 in-lb 3000 in-lb 67.8 Nm 339 Nm 1/2
810430 LTCR 3000 I 600 in-lb 3000 in-lb 67.8 Nm 339 Nm 3/4
810138* LTCR 3600 I 1200 in-lb 3600 in-lb 81.4 Nm 407 Nm 3/4
810151* LTCR 7200 I 1400 in-lb 7200 in-lb 162.6 Nm 813 Nm 3/4

Grip Extension for All Wrenches 3000 In. Lbs. Capacity or less Order PN 853601. Grip Extension

The use of grip extension requires recalibration.

*Optional extension handle for wrenches 810138 and 810151 - Order Part Number 853363. Handle Extension Tube

The use of the extension handle requires recalibration.

The handle on the wrench looks soft. Is it?

This preset ratcheting click wrench comes with a dual grip configuration. It has an inner and outer grip. The inner grip is Sturtevant Richmont blue and you can see a small portion of the inner grip, giving it a stylish look. 

The inner grip is made from Plastisol and has a Durometer rating of A65 +/-5/ 

The outer grip comfort factor owes its characteristics to the PVC Foam construction. The Durometer says it has a Shore rating A53 +/-5. 

The slightly softer handle over the harder handle provides excellent grip control while making the tool very comfortable in the operator's hand. 

LTCR Industrial Assembly Tool Preset Torque Ratcheting Click Wrench

Additional Technical Information

LTCR Preset Ratcheting Click Wrench Dimensions in English Units of Measure    

Part NumberModel DesignationA (in.)B (in.)C (in.)D (in.)Weight (lbs.)

Square Drive Size (in.)

810400 LTCR 50 I 8.0 1.0 0.8 0.9 0.5 1/4
810401 LTCR 150 I 8.0 1.0 0.8 0.9 0.5 1/4
810589 LTCR 150 I 8.0 1.4 1.1 0.9 0.5 3/8
810058 LTCR 300 I 10.4 1.4 1.1 0.9 1.0 3/8
810055 LTCR 750 I 14.8 1.4 1.1 0.9 1.3 3/8
810060 LTCR 750 I 14.8 1.4 1.1 0.9 1.3 1/2
810402 LTCR 1200 I 17.6 1.4 1.1 0.9 1.5 3/8
810056 LTCR 1800 I 18.3 1.9 1.4 0.9 1.8 1/2
810059 LTCR 3000 I 22.9 1.9 1.4 1.1 3.0 1/2
810430 LTCR 3000 I 22.9 1.9 1.4 1.1 3.0 3/4
810138* LTCR 3600 I 27.4 2.7 2.0 2.0 7.8 3/4
810151* LTCR 7200 I 37.4 2.7 2.0 2.0 10.0 3/4

  

Grip Extension for All Wrenches 3000 in-lb Capacity or less Order PN 853601. Grip Extension

The use of grip extension requires recalibration.

*Optional extension handle for wrenches 810138 and 810151 -Order PartNumber 853363.extension handle for preset torque wrench

Use of Extension Handle Requires Wrench Recalibration

LTCR Preset industrial assembly torque wrench

LTCR Preset Ratcheting Click Wrench Dimensions in Metric Units of Measure  

Part NumberModel DesignationA (mm)B (mm)C (mm)D (mm)Weight (kg)Square Drive Size (in)
810400 LTCR 50 I 186 25 21 24 0.2 1/4
810401 LTCR 150 I 186 25 21 24 0.2 1/4
810589 LTCR 150 I 200 35 29 24 0.2 3/8
810058 LTCR 300 I 264 35 29 24 0.5 3/8
810055 LTCR 750 I 376 35 29 24 0.6 3/8
810060 LTCR 750 I 376 35 29 24 0.6 1/2
810402 LTCR 1200 I 448 35 29 24 0.7 1/2
810056 LTCR 1800 I 464 49 37 24 0.8 1/2
810059 LTCR 3000 I 581 49 37 27 1.4 1/2
810430 LTCR 3000 I 581 49 37 27 1.4 3/4
810138* LTCR 3600 I 695 68 51 51 3.5 3/4
810151* LTCR 7200 I 949

68

51 51 4.5 3/4

Grip Extension for All Wrenches 3000 In. Lbs. Capacity or less Order PN 853601. Grip Extension

The use of a handle requires recalibration.

*Optional Extension Handle for wrenches 810138 and 810151 - Order Part Number 853363.

Use of Extension Handle Requires Wrench Recalibration 

 

Ratchet Renewal Kit

Need to replace a ratchet? Don't buy a new wrench. Get a Ratchet Renewal Kit instead.

More information about our Ratchet Renewal Kit here.

 

 

 

Applications

Preset Ratcheting Square Drive torque wrenches are ideal for any application where:

  • The fastener or fitting to be tightened can be engaged with a socket.
  • The same torque is to be applied repeatedly.
  • It is advisable to eliminate the possibility of having the operator set the wrong torque on the tool.
  • A higher amount of rotation or limited access requires ratcheting to achieve the desired torque.
  • High operator efficiency is needed.
  • The simplicity of operation is needed.
  • Very high durability is needed.

The LTCR-Series tools are superb for these types of industrial assembly applications.

Features and Characteristics

  • LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789. 
  • When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab. 
  • Error Proofing By Design flattened case prevents side loading.
  • The flattened case provides support for the click mechanism so the wrench is easier to calibrate and it holds calibration longer.
  • Error Proofing By Guidance creates excellent tactile and audible pulse when the preset torque is achieved.
  • Cushioned comfort grip plus lightweight for excellent ergonomics.
  • Slide pin ratchet provides excellent strength and durability.
  • Easy to install Ratchet Renewal Kit is available.
  • The torque is preset and locked in with a special tool.
  • Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC, SLTC, LTC, LTCR, and LTCS wrenches.
  • Torque can be set using any unit of measurement.
  • Can be ordered preset from the factory or you can set the torque with your own torque tester.
  • Wrench measures torque in the clockwise direction.

 

Video Embed Code
2 Minute Torque Talk Full Scale and Indicated Value

 

American made tools by union hands

Sturtevant Richmont tools are proudly made in Carol Stream, Illinois by highly capable hands.