Need the instruction set for the LTC preset torque wrench with interchangeable heads? Scroll down to the bottom of the page.
Please note that these wrenches click in one direction meaning that they apply and measure torque in the clockwise direction. This preset torque wrench comes with an arrow engraved on the case that calls out which direction torque will be applied and measured. You can use this tool to loosen a fastener in the counterclockwise direction, but you will NOT be able to measure the amount of applied torque.
When the wrench clicks, the designated amount of torque has been applied. Stop pulling. Continuing to pull after the wrench clicks can increase the applied torque to a value that exceeds the engineering specification.
LTC Preset Click Wrench Overview - English and Metric Units of Measure
Part Number | Model Designation | Minimum Capacity English | Tool Capacity English | Minimum Capacity Metric | Tool Capacity Metric |
---|---|---|---|---|---|
810100 | LTC 50 I | 10 in-lb | 50 in-lb | 1.2 Nm | 6 Nm |
810011 | LTC 150 I | 30 in-lb | 150 in-lb | 3.4 Nm | 17 Nm |
810574 | LTC 300 I OHT** | 150 in-lb | 300 in-lb | 17 Nm | 34 Nm |
810016 | LTC 300 I | 60 in-lb | 300 in-lb | 6.8 Nm | 34 Nm |
810013 | LTC 750 I | 150 in-lb | 750 in-lb | 17 Nm | 85 Nm |
810014 | LTC 1800 I | 360 in-lb | 1800 in-lb | 40.8 Nm | 204 Nm |
810054 | LTC ERGO 1800 I | 360 in-lb | 1800 in-lb | 40.8 Nm | 204 Nm |
810802 | LTC 3000 I | 600 in-lb | 3000 in-lb | 67.79 Nm | 338 Nm |
810334 | LTC 3600 I | 720 in-lb | 3600 in-lb | 81.4 Nm | 407 Nm |
810137 | LTC 4800 I | 960 in-lb | 4800 in-lb | 108.4 Nm | 542 Nm |
Note: the Standard minimum capacity for our tools is typically 20% of the rated capacity.
The outer grip on our LTC (limiting torque control) wrenches is made from PVC foam. This preset click wrench comes with an inner and outer grip. The inner grip is Sturtevant Richmont blue and you can see a small portion of the inner grip, giving it a stylish look.
The inner grip is made from Plastisol and has a Durometer rating of A65 +/-5/
The outer grip comfort factor owes its characteristics to the PVC Foam construction. The Durometer says it has a Shore rating A53 +/-5.
The slightly softer handle over the harder handle provides excellent grip control while making the tool very comfortable in the operator's hand.
LTC Preset Click Wrench Dimensions in English Units of Measure
Part Number | Model Designation | A (in.) | B (in.) | C (in.) | D (in.) | Weight (lbs.) |
---|---|---|---|---|---|---|
810100 | LTC 50 I | 6.9 | 0.8 | 0.5 | 0.9 | 0.5 |
810011 | LTC 150 I | 6.9 | 0.8 | 0.5 | 0.9 | 0.5 |
810574 | LTC 300 I OHT** | 6.9 | 0.8 | 0.5 | 0.9 | 0.5 |
810016 | LTC 300 I | 8.8 | 0.8 | 0.5 | 0.9 | 0.8 |
810013 | LTC 750 I | 12.6 | 1.0 | 0.5 | 0.9 | 1.0 |
810014 | LTC 1800 I | 15.9 | 1.1 | 0.5 | 0.9 | 1.3 |
810054 | LTC ERGO 1800 I | 19.6 | 1.1 | 0.5 | 0.9 | 1.5 |
810802 | LTC 3000 I | 20.5 | 1.8 | 0.6 | 2.0 | 4.9 |
810334 | LTC 3600 I | 24.3 | 1.8 | 0.6 | 2.0 | 5.5 |
810137 | LTC 4800 I | 34.3 | 1.8 | 0.6 | 2.0 | 8.3 |
Note: Standard minimum capacity for our tools is typically 20% of the rated capacity
** The minimum capacity for p/n 810574 is 50% of wrench capacity.
Call us Worldwide at +1 847.455.8677 or Toll-Free (US Only) 1-800.877.1347
Handle Extension for Wrenches With Capacity Greater Than 3000 In lb Order PN 853363
Use of handle requires recalibration.
Part Number | Model Designation | A (mm) | B (mm) | C (mm) | D (mm) | Weight (kg) |
---|---|---|---|---|---|---|
810100 | LTC 50 I | 175 | 19 | 13 | 24 | 0.2 |
810011 | LTC 150 I | 175 | 19 | 13 | 24 | 0.2 |
810574 | LTC 300 I OHT** | 175 | 19 | 13 | 24 | 0.2 |
810016 | LTC 300 I | 224 | 19 | 13 | 24 | 0.3 |
810013 | LTC 750 I | 319 | 25 | 13 | 24 | 0.5 |
810014 | LTC 1800 I | 405 | 29 | 13 | 24 | 0.6 |
810054 | LTC ERGO 1800 I | 498 | 29 | 23 | 24 | 0.7 |
810802 | LTC 3000 | 520 | 44 | 16 | 51 | 2.2 |
810334 | LTC 3600 I | 618 | 44 | 16 | 51 | 2.5 |
810137 | LTC 4800 I | 872 | 44 | 16 | 51 | 3.8 |
Note: Standard minimum capacity for our tools is typically 20% of the rated capacity.
** The minimum capacity for p/n 810574 is 50% of wrench capacity.
Grip Extension for All Wrenches 3000 In-Lbs. Capacity or less Order PN 853601. Use of handle requires recalibration.
Applications
Preset Interchangeable Head torque wrenches are ideal for any application where:
These needs are common in assembly and standardized field maintenance operations, and the LTC-Series tools are superb for these types of applications.
Features and Characteristics
Sturtevant Richmont tools are proudly made in Carol Stream, Illinois by highly capable hands.