Knurl Grip CCM Micrometer Adjustable Click Wrenches

Need a parts print? In the table below, click on the part number of the drawing you want. The PDF will launch and you can download it.

Looking for the Knurl Grip Micrometer Adjustable torque wrench with interchangeable heads? Scroll down to the bottom of the page! The instruction set is available for download.

When the wrench clicks, the designated amount of torque has been applied. Stop pulling. Continuing to pull after the wrench clicks can increase the applied torque to a value that exceeds the engineering specification.

This micrometer adjustable torque wrench measures and applies torque in the clockwise direction. Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction.

Note: This page has two tables for part numbers. If you don't see the wrench you need in the first table, please continue scrolling so you find the right wrench. Thanks!

Specification and Ordering Information

CCM Micrometer Adjustable Click Wrench With Interchangeable Heads English Units of Measure

Part Number	Model Designation	Low Capacity	Maximum Capacity	Graduation	A Inches	B Inches	C Inches	D Inches	Weight (lbs)
869769	CCM 50 I MG	10 in-lb	50 in-lb	1 in-lb	10.1	0.8	0.5	0.9	0.5
869765	CCM 150 I MG	30 in-lb	150 in-lb	2 in-lb	10.1	0.8	0.5	0.9	0.5
869773	CCM 200 I MG	40 in-lb	200 in-lb	2 in-lb	10.1	0.8	0.5	0.9	0.5
869763	CCM 600 I MG	100 in-lb	600 in-lb	5 in-lb	13.8	1.0	0.5	0.9	1
869766	CCM 750 I MG	150 in-lb	750 in-lb	5 in-lb	13.8	1.0	0.5	0.9	1
869764	CCM 1200 I MG	200 in-lb	1200 in-lb	10 in-lb	17.1	1.1	0.5	0.9	1.1
869762	CCM 1800 I MG	300 in-lb	1800 in-lb	10 in-lb	17.1	1.1	0.5	0.9	1.3
869770	CCM 75 MG	15 ft-lb	75 ft-lb	1/2 ft-lb	13.8	1.1	0.5	0.9	1
869771	CCM 150 MG	30 ft-lb	150 ft-lb	1 ft-lb	17.1	1.1	0.5	0.9	1.3
810335*	CCM 300 MG	50 ft-lb	300 ft-lb	2 1/2 ft-lb	26.0	1.8	0.6	2.0	6.5
810772**	CCM 400 MG	80 ft-lb	400 ft-lb	5 ft-lb	35.94	1.8	0.6	2.0	8.3

*These wrenches are calibrated for a 3 7/8" or 98.4 mm common centerline. They can be calibrated for our standard 1 7/16" or 36.5 mm common centerline.

The SR line of Micrometer Adjustable Interchangeable Head Torque Wrenches
are designed to retain accuracy longer, have greater repeatability, and still be in service long after other wrenches have failed. They are available in both English and Metric units of measure.

Specification and Ordering Information

CCM Micrometer Adjustable Click Wrench With Interchangeable Heads Metric Units of Measure

Part Number	Model Designation	Low Capacity	Maximum Capacity	Scale Graduation	A (mm)	B (mm)	C (mm)	D (mm)
869784	6 Nm	1 Nm	6 Nm	.1 Nm	229	19	13	24	0.4
869785	20 Nm	4 Nm	20 Nm	.2 Nm	229	19	13	24	0.4
869786	100 Nm	20 Nm	100 Nm	0.5 Nm	329	25	13	24	0.6
869787	200 Nm	40 Nm	200 Nm	1 Nm	413	29	13	24	0.8
810788*	400 Nm	75 Nm	400 Nm	2.5 Nm	660	44	15	51	2.8
810794*	600 Nm	100 Nm	600 Nm	5 Nm	913	44	15	51	3.4

*These wrenches are calibrated for a 3 7/8" or 98.4 mm common centerline. They can be calibrated for our standard 1 7/16" or 36.5 mm common centerline.

Micrometer Adjustable Interchangeable Head Clicker Torque Wrenches - CCM Series

We've updated our CCM Series micrometer adjustable torque wrench series by adding the new "Knurl Grip" handle. If you have our micrometer adjustable wrenches with the neoprene handle and want the new Knurl Grip, the change is quick and easy. We engineered this process to be an easy "Do It Yourself" project. We have all the support you need online.

If you have existing Sturtevant Richmont micrometer adjustable wrenches with the neoprene grip and want to convert to the new Knurl Grip. Go to the Knurl Grip Conversion page.

Applications

The SR line of Micrometer Adjustable Interchangeable Head Torque Wrenches are an excellent solution when:

Changing torque values quickly and accurately is important
Engaging fasteners with different types of heads is critical
A socket cannot be used on some of the fasteners
A location needs to simplify and minimize torque wrench inventory

Features and Characteristics

Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity.
This meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789.
The SR Dovetail connects with all of our interchangeable heads. Every one

of our interchangeable heads fits on every one of our wrenches.
No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range.
Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved.
The Knurl Grip handle is rugged and comfortable in your hand for long periods of time.
Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale.
Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance.
Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory.
Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline.
Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline.
All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm).

Easy to ready scale on the CCM wrenches Customers tell us they love how well this wrench keeps the desired torque range and they also tell us how quick and easy it is to change the torque value. Why? Part of the answer can be seen in the scale. There is also a larger image of the scale at the top of the page.

Sturtevant Richmont tools are proudly made in Carol Stream, Illinois by highly talented and capable hands.

Micrometer Adjustable CCM Click Wrenches

Specification and Ordering Information

CCM Micrometer Adjustable Click Wrench With Interchangeable Heads English Units of Measure

Specification and Ordering Information

CCM Micrometer Adjustable Click Wrench With Interchangeable Heads Metric Units of Measure

Part Number

Model

Designation

Low Capacity

Maximum

Capacity

Scale

Graduation

A (mm)

B (mm)

C (mm)

D (mm)

6 Nm

1 Nm

6 Nm

.1 Nm

229

19

13

24

0.4

20 Nm

4 Nm

20 Nm

.2 Nm

229

19

13

24

0.4

100 Nm

20 Nm

100 Nm

0.5 Nm

329

25

13

24

0.6

200 Nm

40 Nm

200 Nm

1 Nm

413

29

13

24

0.8

810788*

400 Nm

75 Nm

400 Nm

2.5 Nm

660

44

15

51

2.8

810794*

600 Nm

100 Nm

600 Nm

5 Nm

913

44

15

51

3.4

Micrometer Adjustable Interchangeable Head Clicker Torque Wrenches - CCM Series

Applications

Related Downloads

Instructions

Related Media

Introducing the Knurl Grip Micrometer Adjustable Torque Wrench

Related Products