Caution When Using Head Extensions and Head Adapters!
- Do not use these with CCM-Series torque wrenches.
- Preset the torque wrench after the extension and fastener engagement head have been attached to the tool.
Ordering Information and Specifications 
Dimensions refer to illustration to right.
| Part Number | Model Designation | A (in.) | B (in.) | C (in.) | D (in.) | Torque Rating (in lb) |
|---|---|---|---|---|---|---|
| 819487 | LTCE - 4 - 15 | 4 | 1.125 | 0.375 | 1.125 | 300 |
| 819504 | LTCE - 6 - 15 | 6 | 1.25 | 0.375 | 1.125 | 800 |
Please Note: These extensions MUST NOT be used with the Quick Change dovetail. These extensions should be used only with the Pin & Spring dovetail.
Applications
- These extensions are designed for use with LTC, SLTC, and SLTC-FM preset torque wrenches. They can be used to extend the length of the tool when access to the fastener is difficult without the extra length. The preset torque wrench must always be preset after the extension and the fastener engagement interchangeable head has been attached. There is a 15-degree bend in the extension; fastener engagement will be 15 degrees off the tool centerline.
Need Assistance? Worldwide call 1+847-455-8677
Sturtevant Richmont tools are proudly made in Carol Stream by highly capable hands.
Related Products
LTCS Preset Fixed Square Drive Clicker-Type Torque Wrenches
LTCR Preset Ratcheting Clicker-Type Torque Wrenches
LTC Preset Interchangeable Head Clicker-Type Torque Wrenches
BLT Bidirectional Preset Click Wrenches
The DTC: Digital Torque and Angle Wrench
