Torque Tool Calibration Transducers

Transducers

Many of you have had the System 4/5 since it first came to market. Many of you still want to buy the transformers that work with that System 4/5. We are happy to take care of that for you.

PLEASE NOTE: With technology changes, compatibility issues can arise. If you are ordering a transducer for System 4/5 please see the transducer chart on the System 4/5 page. This ensures compatibility.

The new System 8 created an opportunity to refine our transducer line. We have reduced the line down to three (3) simple categories without sacrificing flexibility. You can still cover all your torque calibration needs with the testers in these three lines.

TT Series - Built on the SR hex flange.
TT-QC Series - Quick Connect System for rapid transducer changes.
TT-L Series - Built-in L-bracket for horizontal or vertical mounting.

Here is the new transducer line up:

System 8: TT Series Transducers

Part Number	Model Designation	Low Torque Range English	Torque Capacity English	Low Torque Range Metric	Newton Meters	Drive Size (in)	Drive Type
10009*	TT 25 IO	2.5 in oz	25 in oz	1.77 cNm	17.7 cNm	1/4	Hex Male
10285	TT 10 I	1 in-lb	10 in-lb	11.3 cNm	113 cNm	1/4	Hex Male
10286	TT 50 I	5 in-lb	50 in-lb	.56 Nm	5.6 Nm	1/4	Hex Male
10287	TT 100 I	10 in-lb	100 in-lb	1.13 Nm	11.3 Nm	3/8	Hex Male
10288	TT 300 I	30 in-lb	300 in-lb	3.4 Nm	34 Nm	3/8	Hex Male
10289	TT 80	8 ft-lb	80 ft-lb	10.8 Nm	108.5 Nm	1/2	Square Female
10290	TT 150	15 ft-lb	150 ft-lb	20.3 Nm	203.4 Nm	1/2	Square Female
10291	TT 250	25 ft-lb	250 ft-lb	34 Nm	340 Nm	3/4	Square Female
10292	TT 600	60 ft-lb	600 ft-lb	81.3 Nm	813.5 Nm	3/4	Square Female
10026*	TT 1000	100 ft-lb	1000 ft-lb	135.6 Nm	1355.8 Nm	1	Square Female
10027*	TT 2000	200 ft-lb	2000 ft-lb	271.2 Nm	2712 Nm	1	Square Female

*Indicates cable is included with the unit. Otherwise, all transducers require Part Number 10293 Cable to be operational.

Understanding Model Designation

Part Number	Model Designation	Unit of Measure
10009	TT 25 IO	Inch Ounces
10285	TT 10 I	Inch Pounds
10289	TT 80	Foot Pounds

In our model designation column, you will see different alpha characters following the numerical model designation.

Part number 10009 has a model designation of TT 25 IO. The TT identifies the transducer model series. The 25 identified the capacity. The IO following the capacity identifies the units of measure. In this case, the TT 25 IO tells us that this TT series transducer has a capacity of 25-inch ounces.

Part number 10285 has a model designation of TT 10 I. In this case, the capacity is 10, and the units of measure are inch-pounds.

Where there is no unit of measure designation immediately following the capacity, foot-pounds is the standard unit of measure. If you see a metric designation following the capacity, like Nm or Newton Metres, are metric.

This system applies to all of our tools. Here we have seen the examples for torque transducers. The system applies to our wrenches and screwdrivers.

Testing Pulse Tools? Be sure to visit our Run Down Fixtures page.

Need more information?

QC Series Torque Calibration Transducer

System 8: TT QC Series Transducers

Part Number	Model Designation	Low Torque Range English	Torque Capacity English	Low Torque Range Metric	Torque Capacity Metric	Drive Size	Drive Type
10211*	TT-QC 25 IO	2.5 in-oz	25 in-oz	1.77 cNm	17.7 cNm	1/4	Hex Male
10300	TT-QC 10 I	16 in-oz	160 in-oz	11.3 cNm	113 cNm	1/4	Hex Male
10301	TT-QC 50 I	5 in-lb	50 in-lb	.56 Nm	5.6 Nm	1/4	Hex Male
10302	TT-QC 100 I	10 in-lb	100 in-lb	1.13 Nm	11.3 Nm	3/8	Hex Male
10303	TT-QC 300 I	30 in-lb	300 in-lb	3.4 Nm	34 Nm	3/8	Hex Male
10304	TT-QC 80	96 in-lb	960 in-lb	10.8 Nm	108.5 Nm	1/2	Square Female
10305	TT-QC 150	180 in-lb	1800 in-lb	20.3 Nm	203.4 Nm	1/2	Square Female
10306	TT-QC 250	300 in-lb	3000 in-lb	34 Nm	340 Nm	3/4	Square Female
10307	TT-QC 600	60 ft-lb	600 ft-lb	81.3 Nm	813.5 Nm	3/4	Square Female
10209*	TT-QC 1000	100 ft-lb	1000 ft-lb	135.6 Nm	1355.6 Nm	1	Square Female
10210*	TT-QC 2000	200 ft-lb	2000 ft-lb	271 Nm	2712 Nm	1	Square Female

*Indicates cable is included with the unit. Otherwise, all transducers require Part Number 10293 Cable to be operational.

Torque tool calibration TT-L Transducer

TT-L Series Transducers

Part Number	Model Designation	Low Torque Range English	Torque Capacity English	Low Torque Range Metric	Torque Capacity Metric	Drive Size	Drive Type
10257	TT-L 10 I	16 in-oz	160 in-oz	11.3 cNm	113 cNm	1/4	Hex Male
10258	TT-L 50 I	5 in-lb	50 in-lb	.56 Nm	5.6 Nm	1/4	Hex Male
10259	TT-L 100 I	10 in-lb	100 in-lb	1.13 Nm	11.3 Nm	3/8	Hex Male
10260	TT-L 300 I	30 in-lb	300 in-lb	3.4 Nm	34 Nm	3/8	Hex Male
10261	TT-L 80	96 in-lb	960 in-lb	10.8 Nm	108.5 Nm	1/2	Square Female
10262	TT-L 150	180 in-lb	1800 in-lb	20.3 Nm	203.4 Nm	1/2	Square Female
10263	TT-L 250	300 in-lb	3000 in-lb	34 Nm	340 Nm	3/4	Square Female
10264	TT-L 600	60 ft-lb	600 ft-lb	81.3 Nm	813.5 Nm	3/4	Square Female