Part Number |
Model Designation |
English Low Capacity |
English Capacity |
Metric Low Capacity |
Newton Metres |
Drive Size | Drive Style |
10691 | 10 I | 1 in-lb | 10 in-lb | 0.1 Nm | 1 Nm | 1/4" | Hex Male |
10692 | 50 I | 5 in-lb | 50 in-lb | 0.6 Nm | 6 Nm | 1/4" | Hex Male |
10693 | 100 I | 10 in-lb | 100 in-lb | 1.2 Nm | 12 Nm | 3/8" | Hex Male |
10694 | 300 I | 30 in-lb | 300 in-lb | 3.4 Nm | 34 Nm | 3/8" | Hex Male |
10695* | 80 | 8 ft-lb | 80 ft-lb | 10.9 Nm | 109 Nm | 1/2" | Sq Female |
10696* | 150 | 15 ft-lb | 150 ft-lb | 20.1 Nm | 201 Nm | 1/2" | Sq Female |
10697** | 250 | 25 ft-lb | 250 ft-lb | 33.9 Nm | 339 Nm | 3/4" | Sq Female |
10698** | 600 | 60 ft-lb | 600 ft-lb | 81.4 Nm | 814 Nm | 3/4" | Sq Female |
21555 |
Power Supply for both Domestic and International included |
* Includes p/n 870777 .5” M Square to .375” F Square Adapter.
** Includes p/n 870778 .75” M Square to .5” F Square and .5” M Square to .375” F Square adapters
Optional: p/n 870776 3/8" M Square Adapter to 1/4" F Square Adapter
Part Number | Model Designation | Description |
816261 | AA NiMH Rechargeable Batteries | 4 Pack 1400 mAh |
21259 | Battery Quick Charge Unit and Batteries Kit | AC-powered external battery charging unit. Includes 4 packs of 1500 mAH NiMH rechargeable batteries. |
10599 | Torque Tool Manager 4.0 | Calibration software for Torq-Tronics 2 and System 8 |
10230 | Bracket, Single | Single Stand holds one (1) Torq-Tronics 2 unit upright. |
10231 | Bracket, Dual | Dual Stand holds two (2) Torq-Tronics 2 units upright. |
*An Important Note About Our NiMH Battery Selection
The 1100 Series Exacta 2 circuit board is designed on the highly consistent 1.2-volt power curve provided by rechargeable NiMH batteries. Other batteries like Alkaline or Lithium batteries provide 1.5 volts in the power curve. The additional voltage will damage the circuit board.
Please Remember These NiMH Battery Facts:
For more information about batteries and SR tools, see our Battery Selection Page.
Sturtevant Richmont invented the first torque analyzers and torque testers. Those inventions shaped both the manufacturing and the torque tool industry. The new Torq-Tronics 2® takes the industry to another level by being the first torque tester to let the workers and supervisors know that the tester may have been pulled out of tolerance.
The first digital torque tester with Fail-Safe Engineering!
What good is testing torque tools with a tester that could be out of tolerance and you don’t know it? Torq-Tronics 2 with Fail-Safe Engineering solves this long-standing challenge.
Like all Sturtevant Richmont tools, Torq-Tronics 2 is built for accuracy and durability and meets or exceeds the following standards:
Torq-Tronics 2 display has a floating-point decimal resolution showing 6 digits throughout. Combine that with an accuracy of +/- 0.5% (indicated value) from 10% to 100% in both clockwise and counterclockwise directions, the Torq-Tronics 2 capabilities give you control of your torque testing program.
The new Torq-Tronics 2® line of Digital Torque Testers is ideal for interim or daily torque testing programs for clicker torque wrenches, cam-over torque tools, torque screwdrivers, and non-impact power tools.
The ten (10) filters for testing impulse tools expand your control and achieve greater accuracy during testing. While you can test pulse tools and battery-powered tools, under NO CIRCUMSTANCES, you should ever test an IMPACT WRENCH ON A STURTEVANT RICHMONT TESTER. DOING SO IMMEDIATELY VOIDS THE WARRANTY.
Battery-powered for mobile use allows greater versatility when and where you test tools. Memory holds complete information about each torque event. Nine hundred ninety-nine torque events are all date and time stamped and can be downloaded in a CSV file format for your convenience.
Units may be wall-mounted.
Units may be bench mounted.
Torq-Tronics 2 error proofs your error-proofing program by letting you know when the unit has been stretched to 120% or more of capacity and may no longer be in calibration.
Every aspect of the torque tool testing process has been engineered to fail-safe specifications to protect your quality and your reputation.
Customers tell us we build the most reliable torque testing instruments and transducers on the market. But even the strongest instruments are subject to the rigors of the industrial world.
Calibration labs and in-house testing face the same question:
What good is testing torque tools with a tester that unknowingly could be out of calibration?
TorqTronics 2 solves this long-standing challenge with Fail-Safe Engineering. When a transducer is pulled to 120% or more of the rated capacity, Fail-Safe Engineering automatically notifies everyone of a potential problem and tracks all work completed until the issue is resolved.
We designed the flashing LED to get the attention of anyone who has a clear line of sight on the unit. That flashing red LED will get attention.
Fail-Safe Engineering automatically initiates these powerful steps:
Need Assistance? Worldwide call 1+847-455-8677
Sturtevant Richmont tools are proudly made in Carol Stream, Illinois by highly capable hands.