Run Down Fixture Repair Kits

Ordering Information for 339 Nm Kit (3000 in-lb)

Part Number	Model Designation	RDF Match
816045	339 Nm Kit	10358
Piece Count	Part Description	Size/Dimensions
3	Bushing	13/16" ID x 1.395" OD x 3/4"
9	Screw	M20 x 40 mm 30 mm Hex Head Cap
12	Belleville Washer	Disc Spring M20
6	Washer	Metric, M20, Thick

Power tools are generally accurate 10% to 100% of rated capacity. In selecting a run down fixture match tool capacity with the rundown fixture kit. Example: If you have a 150 Nm or even a 200 Nm power tool you would select the 204 Nm run down fixture. When repairing the run-down fixture be sure to match the repair kit capacity to the power tool capacity.

Ordering Information for 204 Nm Kit (1800 in-lb)

Part Number	Model Designation	RDF Number Match
816044	204 Nm	10357
Piece Count	Part Description	Size/Dimensions
3	Bushing
9	Screw	M16 x 40 mm .64" ID x 1.148" OD Hex Head Cap, 24 mm Hex Head
12	Belleville Disc Spring	M16 Thick
6	Washer	Metric M16, Thick

Ordering Information for 109 Nm Kit (960 in-lb)

Part Number	Model Designation	RDF Match
816043	109 Nm Kit	10356
Piece Count	Part Description	Size/Description
3	Bushing	9/16" ID x 1.02" OD x 5/8"
9	Screw	M14 x 35 mm Hex Head Cap, 24 mm Hex Head
12	Belleville Disc Spring	M14 Thick
6	Washer	Metric M14, Thick

Ordering Information for 68 Nm Kit (600 in-lb)

Part Number	Model Designation	RDF Match
816042	68 Nm	10355
Piece Count	Part Description	Size/Dimensions
3	Bushing
9	Screw	M12 x 30 mm Hex Head Cap 19 mm Hex Head
12	Belleville Disc Spring	M12 Thick
6	Washer, Metric	M12, Thick

Ordering Information for 34 Nm Kit (300 in-lb)

Note: This kit fits two RDF units.

Part Number	Model Designation	RDF Match
816041	34 Nm Kit	10353
816041	34 Nm Kit	10354
Piece Count	Part Description	Size/Dimensions
10	O-Ring	11/32 OD x 7/32 ID x 1/16 Thick
3	Bushing	.332 OD x .645" ID x 3/8 Thick
9	Screw	M8 x 20 mm Hex Head Cap 6 mm Hex Female
12	Belleville Disc Spring
6	Washer, Metric	M8 Thick
1	Power Bit	6 mm Hex 1/4" Shank

Ordering Information for 17 Nm Kit (150 in-lb)

Part Number	Model Designation	RDF Match
816040	17 Nm	10352
Piece Count	Description	Size/Dimensions
10	O-Ring	5/16 OD x 3/16 ID x 1/16 Thick
3	Bushing	.502 OD x .242" ID x 5/16 Thick
9	Screw	M6 16mm
12	Belleville Disc Spring	.255" ID x .500 OD
6	Washer, Metric	M6 Thick
1	Power Bit	5 mm Hex 1/4" Shank

Ordering Information for 6 Nm Kit (50 in-lb)

Part Number	Model Designation	RDF Match
816039	6 Nm Kit	10351
Piece Count	Description	Size/Dimensions
10	O-Ring	9/32" OD x 5/32" ID x 1/16" Thick
3	Bushing	.421" OD x .204" ID x 1/4" Thick
9	Screw	M5 x 12 mm Socket Head 4 mm Female
12	Belleville Disc Spring	.52 mm OD x 10 mm ID
6	Washer Metric	M5 Thick
1	Power Bit	4mm Hex, 1/4" Hex Shank

Ordering Information for 3 Nm Kit (25 in-lb)

Part Number	Model Designation	RDF Match
816038	3 Nm Kit	10350
Piece Count	Description	Size/Dimensions
10	O-Ring	15/16 OD x 1/8 ID x 1/16 Thick
3	Bushing	.327" OD x .166" ID x 1/4" Thick
9	Screw	M4 x 10 mm Socket Head Cap 3 mm Female
12	Belleville Disc Spring	4.2 mm ID x 8 mm OD
6	Washer, Metric	M3 Thick
1	Power Bit	3 mm Hex 1/4" Hex Shank

Ordering Information for 1 Nm Kit (10 in-lb)

Part Number	Model Designation	RDF Match
816037	1 Nm Kit	10349
Piece Count	Description	Size/Dimensions
10	O-Ring	15/64 OD x 7/64 ID x 1/16" Thick
3	Bushing	#30
9	Screw	M3 x 10 mm Socket Head Cap 2.5 mm Female
12	Belleville Disc Spring	J25 (3.175) ID x .25 (6.35) OD
6	Washer, Metric	M3 Thick
1	Power Bit	8.5 mm Hex, 1/4" Hex Shank

Product Note:

Each Run Down Fixture Repair Kit is the complete parts replacement for your fixture. With the included parts you can create a test to evaluate medium and hard joints.

The kit includes the appropriate number of Bushings, Washers, Screws, Belleville Washers, Washers, and Power Bits for the corresponding fixture. Not all kits contain a power bit.

When replacing parts in your Run Down Fixture be sure to replace ALL the parts and not just the part that may be worn out. In the long run the complete replacement approach saves time, headaches and ensures greater test accuracy.

Application Information

Like any other torque tool, power tools need to be tested. How they are tested has some significant differences than with other torque tools. The reason for the difference is that power tools move at faster rates of speed. It takes time to overcome inertia and get the fastener moving and it takes time to slow it down.

Another difference is that power tools require filters to block out noise in the frequencies.

Our digital torque testers have ten resident filters to help improve the accuracy of power tool testing. These are the power tool testing filters.

Filter	Frequency
Filter N/A	No Filter Used
Filter 0	100 Hz
Filter 1	250 Hz
Filter 2	500 Hz
Filter 3	571 Hz
Filter 4	666 Hz
Filter 5	800 Hz
Filter 6	1000 Hz
Filter 7	1333 Hz
Filter 8	2000 Hz
Filter 9	4000 Hz