Digital Torque Testing and Calibration Equipment

System 8

The new System 8® takes the industry to another level by being the first torque tester to let the workers and supervisors know that the tester may have been pulled out of spec.

Our most accurate digital torque tester with Fail Safe Engineering!

• Greater accuracy and durability with simplicity and ease of operation
• Floating decimal point, 6 digit display is easy to read
• Accurate to +/- .25% (indicated value) from 10% to 100%
• Over capacity alert and tracking

Torque Tool Calibration Transducers

Not all torque transducers are the same. Find out why users say Sturtevant Richmont torque tool calibration transducers stand above the rest. 

Torq-Tronics 2 Digital Torque Tester

Torq-Tronics 2 is the digital torque tester from Sturtevant Richmont with robust transducers and Fail Safe Engineering.

Accurate to +/- .5% Indicated Value this digital torque tester can be used as a daily verification workhorse and still calibrate torque tools and meet N.I.S.T. traceability standards. If your torque tester doesn't have Fail Safe Engineering you may want to take a closer look at your current tester and see where it is letting you down. 

Rundown Fixtures

Rundown Fixtures

Testing pulse tools? Rundown fixtures are a critical piece of the equation. 

Rundown fixtures may be used with the System 8, Torq-Tronics 2, or our legacy System 4/5/6 and Torq-Tronics digital torque testers. 

VeriTorq®

• +/- 1% I. V. Accuracy
• Three modes of operation - Track, Peak and Clicker 
• Four buttons do everything
• Excellent for interim checks.
• Suitable for all manual torque tools of +/- 4% I.V. Accuracy or less.
• Includes FREE certificate of calibration from our ISO/IEC 17025 Accredited Calibration Laboratory!

Mechanical Loaders

Why So Many Companies Buy Sturtevant Richmont Digital Torque Testers

Torque Tool Manager 4.0 (TTM 4.0)

Torque tool calibration causing challenges in your operation? Sturtevant Richmont digital torque testers and Torque Tool Manager 4.0 are your answer. 

Fail Safe Engineering and Your Assemblies

What if the standard by which you measure everything was wrong and you didn't know it? An undetected torque transducer out of tolerance is just that. Learn how to quickly identify potential out of tolerance torque transducers and trace any out of tolerance tools. 

The Only Digital Testers With Fail Safe Engineering Come From Sturtevant Richmont

Fail Safe Engineering Protects Your Quality and Assembly Integrity

Sturtevant Richmont "Fail Safe Engineering" is a protocol based, event triggered process sequence that notifies everyone that a torque transducer has been stretched to at at least 120% of the rated capacity and should be checked to ensure that the transducer is still within required specification. T

To Learn more about Fail Safe Engineering click here. 

Power Torque Tool Testing FAQ

Rundown Fixtures

Testing clutch, stall or pulse tools requires that the tools be able to rotate at operating RPM before the torque output is actually tested. S/R Rundown Fixtures enable you to achieve that requirement, while emulating either a hard or medium joint. See how much they can improve your power tool testing!

Run Down Fixture Repair Kits

Run Down Fixtures are an important part of power tool testing. Be sure that you have the appropriate Run Down Fixture for your torque tool capacities.