LTC/LTCR/LTCS Customizable Handle Extension

This customizable extension was designed in response to your requests for longer tools. It gives you the ability to add up to 7” of length to your tool, with the actual length chosen by you to meet your needs.

This handle extension is actually a four-piece kit consisting of:

• A threaded adapter that attaches to the back of your LTC/LTCR/LTCS using the exiting buttress threads. This adapter fits all S/R preset torque wrenches of 1800 inch pounds capacity and below.
• A 6” long solid handle extension that can be cut down to as little as 0.5” long.
• A 1/8” x 11/16” spring pin that attaches the handle extension to the threaded adapter.
• A new vinyl grip to slide over the handle extension after you have customized it.

To use this handle extension:

• Cut it to the length you need if you wish a length shorter than the 7” full length of the handle extension.
• Attach the vinyl grip by sliding it over the rear of the extension.
• Thread it firmly into the rear of your preset torque wrench.
• Calibrate the torque wrench with the handle extension in place. It’s that easy!

Increase your leverage - order P/N 853538 today!