Products > Torque Testers & Calibration Equipment
System 6 Digital Torque Testers are excellent for:
- Testing non-impacting power tools (stall, clutch, pulse)
- Testing torque on rotating components and assemblies
- Use when a broad range of torques will be encountered
- Connects with any of seven capacities of rotary torque transducers
- Up to five torque transducers may be calibrated into tester
- Accuracy of 0.5% of Indicated Value from 10% to 100% of transducer capacity
- Simple to use
- Four modes of operation: Track, Peak, Initial Peak, Power Tool
- Large backlit display permits use in all lighting conditions.
- Includes FREE certificate of calibration for each transducer calibrated into the system from our ISO/IEC 17025 Accredited Calibration Laboratory!
| Part No. |
Model |
Description |
| 10101 |
System 6-AC 120 |
System 6 w/120 VAC line operation |
| 10102 |
System 6-AC 240 |
System 6 w/240 VAC line operation* |
| 10096 |
6 Ft. RTT Cable |
RTT Transducer to System 6 cable, 6 feet long |
| 10104 |
30 Ft. RTT Cable |
RTT Transducer to System 6 cable, 30 feet long |
| 10105 |
50 Ft. RTT Cable |
RTT Transducer to System 6 cable, 50 feet long |
| * Requires special power cable. For cable descriptions and part numbers contact Customer Service |
|
| Measurement |
|
| Accuracy @ 72 deg. F (22 deg. C) |
0.25% Indicated Value |
| Accuracy Range |
10% - 100% of Transducer Capacity |
| System Resolution |
4.5 digits |
| Resolution A/D Convertor |
1/65,536 |
| Conversion Rate |
100kHz |
| Signal to Noise Ratio |
78 dB |
|
| Physical |
|
| Weight, AC Models |
4.3 lbs. (2.0 Kg) |
| Dimensions |
3.375” (96mm) H x 7.56” (192mm) W x 8.64” (220mm) D |
| Display |
1 line x 16 characters, 0.5” (12.7mm) high characters, backlit LCD |
| Keyboard |
Membrane Switch Panel |
| Enclosure |
Aluminum, plastic bezel, meets MIL-T-28800E, Type 5, Class E specifications |
| Transducer Interface |
MS3102A 18-01S Amphenol |
| Serial Port |
RS 232C, set for 4800 baud/n/1 with ASCII handshake |
|
| Operating Temperature Range |
32 deg. F to 125 deg. F (0 deg. C to 51.6 deg. C) |
| Storage Temperature Range |
-80 deg. F to 160 deg. F (-26.7 deg. C to 71.1 deg. C) |
| Storage Humidity Maximum |
95% non-condensing |
| Line Voltage/Frequency |
120 or 240 VAC, 50 or 60 Hz |
| Serial Interface |
RS 232C |
| Baud Rate |
Selectable for 300/1200/2400/4800/9600/19200, 4800 default from factory |
| Stop Bits |
1 |
| Parity |
Selectable for even/off/none/stick/mark, factory default is none |
| Connector |
DB9 female |
| Handshake |
None, ASCII text |
| Classification |
ASME B107.29M, Type 2, Class B |
|
10150
RTT Series Torque Transducers
Torque Tool Manager Software
Transducer Calibration Equipment Overview
|
