Crowfoot Adapter

Products>Specialty and Support Products>Interchangeable Head Overview

Crowfoot Adapter for S/R Flat and Tapered Beam Torque Wrenches

Applications

The S/R Crowfoot Adapter is intended for use with S/R Flat and Tapered Beam torque wrenches when:

A socket cannot be used to engage the fastener or component to be turned, and an S/R Interchangeable Head can be used to engage the fastener or component.

CAUTIONS

When using a Crowfoot Adapter and Interchangeable Head on the wrench the torque output will be different from that shown on the scale of the wrench and the actual torque output must be calculated.
The Crowfoot Adapter and Interchangeable Head must be mounted so that they are parallel to the beam of the wrench and are perpendicular to the base of the scale on the wrench.
Refer to the photograph [at right] of the Crowfoot Adapter with an Interchangeable Head installed on a beam wrench when using this product. The photograph shows the product properly installed on the torque wrench.

Ordering Information
Part No.	Model	Description
850653	SRA 3/8	3/8” Female Square to Male Dovetail
850655	SRA 1/2	1/2” Female Square to Male Dovetail

Technical information
Print	Square Drive	Maximum Torque	Note
850653	3/8 in.	in. lbs.	When used with an Interchangeable Head of 1 7/6” CCL, the Adapter Length will be 3”.
850655	1/2 in.	in. lbs.	When used with an Interchangeable Head of 1 7/6” CCL, the Adapter Length will be 3”.

Sturtevant Richmont